LOMO OKC and CKBK lenses 22 mm. WHETHER or NOT to send lens in Russia to set PL adapter and to install focus arri standart m=0.8 on the lenses.

 LOMO OKC and CKBK lenses 22mm WHETHER or NOT to send lens in Russia to set PL adapter
and to install focus rings arri standart m=0.8 on the lenses?

The lens lomo OKC3-22-1 22mm, OCT19, I can fabricate and install PL adapter.
This lens should be sent to Russia for installation PL adapter and focus rings arri standart m=0.8.   
 

LOMO OKC3-22-1 22mm

LOMO OKC3-22-1 22mm

 The lens lomo OKC3-22-1 22mm, OCT19 mount I can fabricate PL adapter and focus rings arri standart m=0.8.
(these lenses are focus rings m=0.5.) But if you want, you can get back new PL and OCT 19 adapter.
If OCT 19 adapter is fastened by 4 screws, such objective does not need to be dispatched in Russia.
It is possible to send me OCT 19 from lens, after of works receive the PL adapters, and to install it on a lens independently. To remove the OCT 19, to the left to unscrew 4 screws and lift upwards. Customer will receive PL adapter with 4 new screws. They will be a little longer.
Usually such lenses manufactured LOMO for Kinor 35 H camera. Such lenses can also work with Kinor 35 C and Konvas 2 and 8 M.

 and  focus rings arri standart m=0.8. 

  and  focus rings arri standart m=0.8.

LOMO OKC3-22-1 22mm

LOMO OKC3-22-1 22mm
If of such lenses need only focus rings arri standart m=0.8 I can fabricate and to send the customer.
PL adapters will be from stainless steel. Of course.
Focus rings will be from hard aluminum, will be made galvanisation.